Re: Use iLogic to assign a color to one part face

Дата публикации: 23-01-2020 19:01:10

Hi  
 
It occurred to me after reading your second reply, that if you're just wanting to set the face to a known local color, then you can use a much simpler rule similar to what mcgyvr  suggested, here's and example of that too.
 
I hope this helps.
Best of luck to you in all of your Inventor pursuits,
Curtis
http://inventortrenches.blogspot.com
 
'set this rule to watch this parameter
oTrigger = FaceIsColored
Dim oDoc As PartDocument
oDoc = ThisApplication.ActiveDocument
Dim oEntities As Object
oEntities = iLogicVb.Automation.GetNamedEntities(oDoc)
'get the named face
Dim oFace As Face
oFace = oEntities.FindEntity("Target Face")
'set the color if paramter is true
If Parameter("FaceIsColored") = True Then
oFace.Appearance = oDoc.Assets.Item("Dark Green")
Else
oFace.Appearance = oDoc.ActiveAppearance
End If 

Схожие новости

#	Наименование новости	Тональность	Информативность	Дата публикации
1	Bose unveils next-gen QuietComfort Headphones with new industrial design, Immersive Audio, more	0	16.2	06-08-2026

Классификация: . Схожих патентов: 0. Схожая новость: 1. Тональность: 0. Информативность: 0. Источник: forums.autodesk.com.