About Interior Lighting Load

Дата публикации: 02-08-2026 18:47:25

Hello,I'm currently experimenting with Autodesk Insight and Building Energy Performance Simulations.When I adjust window sizes, orientations, or add/remove shading surfaces, the heating and cooling loads change as expected. However, the lighting load remains completely static—it does not adjust with changes to window size or daylit area. Even after reducing window sizes by nearly 50%, the lighting load value doesn't change at all.Is it possible that, Forma Carbon Insights ignores natural daylighting, and only calculates artificial lighting load by building type (office, residental etc.)?If not, how can I make sure that natural daylighting is included in the interlior lighting load within Insight performance results?Thanks, in advance.

Схожие новости

#	Наименование новости	Тональность	Информативность	Дата публикации
1	Shared View does not respect the redefined ViewCube Top orientation	0	5.16	02-08-2026
2	Avoid/Fix Revit Model Publish Failures // Publish Sets	0	5.8	02-08-2026
3	Issue? Offset curves cannot properly identify internal profiles	0	19.45	02-08-2026
4	BASIC FEATURES DON'T WORK --UNLOCK	0	20.02	02-08-2026
5	Как освещение влияет на комфорт двора?	5	7	25-07-2025
6	Sheet Metal Auto Mitering with Angle	0	10.13	02-08-2026
7	Интерьер как в кино 🎬 Есть интерьеры, в которые хочется ...	5	6	29-06-2026
8	New software could cut cooling energy use by 25% in data centers	5	7	07-04-2026
9	Когда входная дверь со стеклом добавляет света, а не проблем	-1	8.19	30-03-2026

Классификация: . Схожих патентов: 0. Схожих новостей: 9. Тональность: 0. Информативность: 6.54. Источник: forums.autodesk.com.