[1] J. Fan, J. Xu, X. Wen, L. Sun, Y. Xiu, Z. Zhang, T. Liu, D. Zhang, P. Wang, D. Xing, The future of bone regeneration: Artificial intelligence in biomaterials discovery, Mater. Today Commun. 40 (2024) 109982.

DOI: 10.1016/j.mtcomm.2024.109982

Google Scholar

[2] N. Aslan, B. Aksakal, F. Findik, Fabrication of porous-Ti6Al4V alloy by using hot pressing technique and Mg space holder for hard-tissue biomedical applications, J. Mater. Sci. Mater. Med . 32(7) (2021) 80.

DOI: 10.1007/s10856-021-06546-2

Google Scholar

[3] B. Arifvianto, M. A. Leeflang, J. Zhou, Diametral compression behavior of biomedical titanium scaffolds with open, interconnected pores prepared with the space holder method, J. Mech. Behav. Biomed. Mater. 68 (2017) 144-154.

DOI: 10.1016/j.jmbbm.2017.01.046

Google Scholar

[4] B. Arifvianto, M. A. Leeflang, J. Zhou, The compression behaviors of titanium/carbamide powder mixtures in the preparation of biomedical titanium scaffolds with the space holder method, Powder Technol. 284 (2015) 112-121.

DOI: 10.1016/j.powtec.2015.06.033

Google Scholar

[5] B.Q. Li, R.Z. Xie, X. Lu, Microstructure, mechanical property and corrosion behavior of porous Ti–Ta–Nb–Zr, Bioact. Mater. 5 (2020) 564-568.

DOI: 10.1016/j.bioactmat.2020.04.014

Google Scholar

[6] A. Rodriguez-Contreras, M. Punset, J. A. Calero, F. J. Gil, E. Ruperez, J. M. Manero, Powder metallurgy with space holder for porous titanium implants: A review, J. Mater. Sci. Technol. 76 (2021) 129-149.

DOI: 10.1016/j.jmst.2020.11.005

Google Scholar

[7] B. Arifvianto, J. Zhou, Fabrication of metallic biomedical scaffolds with the space holder method: A review, Mater. 7 (2014) 3588-3622.

DOI: 10.3390/ma7053588

Google Scholar

[8] M. Mirzaei, M. H. Paydar, Fabrication and Characterization of Core–Shell Density-Graded 316L Stainless Steel Porous Structure, J. Mater. Eng. Perform. 28 (2019) 221-230.

DOI: 10.1007/s11665-018-3797-5

Google Scholar

[9] Z. Abdullah, S. Ahmad, A. Ismail, N. Ahmed Khan, Processing of porous stainless steel by compaction method using egg shell as space holder, Key Eng. Mater. 791 (2018) 123-128.

DOI: 10.4028/www.scientific.net/kem.791.123

Google Scholar

[10] H. Jain, D. P. Mondal, G. Gupta, R. Kumar, S. Singh, Synthesis and characterization of 316L stainless steel foam made through two different removal process of space holder method, Manuf. Lett. 26 (2020) 33-36.

DOI: 10.1016/j.mfglet.2020.09.005

Google Scholar

[11] H. I. Bakan, A novel water leaching and sintering process for manufacturing highly porous stainless steel, Scr. Mater. 55 (2006) 203-206.

DOI: 10.1016/j.scriptamat.2006.03.039

Google Scholar

[12] H. Jain, G. Gupta, R. Kumar, D. P. Mondal, Microstructure and compressive deformation behavior of SS foam made through evaporation of urea as space holder, Mater. Chem. Phys. 223 (2019) 737-744.

DOI: 10.1016/j.matchemphys.2018.11.040

Google Scholar

[13] R. W. Heckel, Density-Pressure Relationships in Powder Compaction, Trans. Metall. Soc. AIME. 221 (1961) 671-675.

Google Scholar

[14] S. T. Hong, Y. Hovanski, C. A. Lavender, K. S. Weil, Investigation of die stress profiles during powder compaction using instrumented die, J. Mater. Eng. Perform. 17(3) (2008) 382-386.

DOI: 10.1007/s11665-008-9229-1

Google Scholar

[15] R. F. Mallender, C. J. Dangerfield, D. S. Coleman, Friction coefficients between iron powder compacts and die wall during ejection using various admixed zinc stearate lubricants, Powder Metall. 15 (1972) 130-152.

DOI: 10.1179/pom.1972.15.30.003

Google Scholar

[16] J.M. Sonnergaard, A critical evaluation of the Heckel equation, Int. J. Pharm. 193(1999)63-71.

Google Scholar

[17] ASTM Internasional, Standard Specification for Stainless Steel Bars and Shapes, ASTM A276-06. 2006.

Google Scholar